Warning lamp MINISTAR 1000 - red (Art: 02-1000-002)Email us about this product
Warning lamp MINISTAR 1000 - red
For use in airports and on railway lines
- Warning lamp operates on a single battery type 4R25 STAR (not included)
- Special version for use in airports or on railway lines
- LED technology ensures maximal autonomy
- 5 contact points make it impossible to place a battery incorrectly
- Comes with a sturdy anti-theft bracket (Ø 6 mm) for installation on barriers, fences ...
- Night Mode: photocell activates this blinking warning lamp automatically
- Lens Ø 18 cm with reflective border
- Double sided and rotating lens (90°)
- 2 high-quality LEDs ensure unrivalled durability
- Also available with yellow LED and yellow lens for signaling road works
The MINISTAR 1000 road warning lamp is a so-called "day sleeper". This means that it is only activated at nightfall, when daylight dicreases, by a built-in photocell. The barricade lamp starts blinking at dusk and switches itself off when it gets light again.
Our red MINISTAR has been specially designed for use on building or maintenance sites in airports or on railway lines where specific signage prescriptions apply. This red barricade lamp offers two functions: blinking or continuous light.
By using LED technology for this warning lamp, energy consumption is limited to the absolute minimum. That is why the MINISTAR barricade lamp only needs a single battery (not included) to guarantee a long service life. Under normal temperatures this "day sleeper" has an autonomy of approximately 900 hours. So if the warning lamps works on average 8 hours each night, it lasts up to 3 months without having to replace the battery. When the battery reaches its end, the barricade lamp will stop flashing and give a weaker continuous light. This immediately tells you when a battery change is needed.
Remember that lower temperatures have a major impact on the autonomy of all types of batteries. In winter, when it is colder and when there are fewer hours of daylight, the autonomy of the MINISTAR road warning lamp will therefore also be shorter.
Our PCB's (electronic control panel) for all our warning lamps are designed in such a way that it is impossible to place a battery incorrectly in the battery holder. Whatever orientation you place the battery, the five contact points ensure that the polarity of the battery supply is correct.
Our Ministar 1000 has an almost indestructible polycarbonate lens and a sturdy integrated bracket (Ø 6 mm) made of electrolytically galvanised steel to mount the barricade lamp on beacons or fences. The yellow lens rotates so that you can always point your road warning lamp in the right direction. The light-transmitting lens has a specially designed profile that focuses the light correctly and is surrounded by a prismatic reflector that increases the visibility of the MINISTAR warning lamp.
Like all our barricade lamps, our MINISTAR has a comfortable handle at the top of the lens so that you can easily carry multiple lamps together. That is certainly useful when you place or remove your signage.
The nuts of the mounting bracket and on the closure of the battery case are provided with an anti-theft profile so that they cannot be opened with a normal screwdriver. The universal key for all Traffimex warning lamps can be ordered separately. For every 20 warning lamps you order, three keys are supplied free of charge.
Our warning lamp MINISTAR 1000 is extremely reliable and is used by countless professionals for signaling building or maintenance sites in airports or on railway lines.