Plastic fence feet - 25 kg

Recycled PVC - stackable

• Made from 100% PVC (25 kg) 
• Ideal to use for temporary fences 
• Resists all weatherconditions
• Smooth and without sharp edges
• Openings: 4 x Ø 42 mm + 1 x 60x60 mm 
• Easily stackable
• 50 pieces on pallet
• Dimensions 680 x 246 x 140 mm

These plastic fence feet made of recycled PVC give stability to construction fences and barriers. They are the ideal base for short or long-term placement of wind-permeable construction fences or barriers at construction sites, car parks or events. However, this type of base is not suitable for use with high, completely closed temporary fences without additional ballast or stabilising supports.

You can also use this fence base as ballast, for example to weigh down sheeting, as footplate for poles/tubes or many other innovative uses. 

The well thought-out placement of the openings in the fence feet allows you to position two fences either in the middle of the feet for optimal stability, or at the end so that there is less danger of tripping for passing pedestrians. The additional square openings makes it possible to place signage.

Because of their weight, these plastic fence feet are better suited for sites that will take longer to complete or in exposed and windy areas..

However, its weight of 25 kg and extremely practical handles also mean that these plastic fence feet are easily handled by one person and meet the applicable regulations for manipulating loads at work.

The plastic fence feet are not only a better ecological solution than their concrete alternatives, they are also more resistant to breakage. Keep in mind, however, that in lower temperatures all plastic should be handled with a little more care because of increased brittleness. Apart from this, these bases are resistant to all weather conditions.

This temporary fence base is perfectly stackable. Nevertheless, you should ensure secure strapping and possible wrapping when transporting them. A full pallet of fence bases easily weighs 1.250 kg, but you can always put fewer pieces on a pallet of course.

The plastic fence feet has 4 round openings of Ø42 mm and 1 square openings of 60x60 mm. We can also provide your fence feet with a word logo or your company name, subject to a MOQ of 1500 pieces. This can always be useful for extra name recognition at events or building sitess and also reduces the risk of theft. For these volumes it is also possible to configure different size openings to suit your needs. Contact us to discuss these possibilities.

Our plastic fence feet ensure that every building or temporary fence can be placed easily and stably.